An easy way to divide a 3" Foam Ball into 4 equal segments (quarters).

You will need...

  • The easy-to-use Printable Ball Marking Strips found below
  • Paper scissors
  • Pen/Pencil/Butterknife/Tucking Tool/Tracing Wheel (any one of these)
  • A couple of pins
  • Flexible tape measure

You can find our Soft Foam Balls, right HERE.

(We also have them pre-marked into quarters, right HERE - please check back)

Directions:

  1. Print out the template at 100% (do not re-size or use the 'Shrink to Fit' option on your printer).
  2. Cut out one of the templates.
  3. Pin to the mold line around your Foam Ball.
  4. Use the lines on the template to draw guidelines around the ball (see the video above for instructions).

Helpful Links & Supplies:

Soft Foam (including our pre-lined foam)

Tucking Tool

OG Tape Measures/Ball-Marking Guides (coming soon!)

Using a Ball with NO Pole Markings? HERE IS HOW to fix that

ALL of our Ball Marking Videos 

Free Ornament Pattern Workshop (includes printables)

4 Comments

  1. Jeanette Wisdom on March 23, 2022 at 5:59 pm

    Thank you so much for my free template xx

  2. Lisa on April 30, 2022 at 5:34 pm

    Your creation are so beautiful

  3. Barb on August 14, 2022 at 4:16 pm

    Thank you for sharing!

  4. terry on December 9, 2022 at 3:15 pm

    Thanks for the template, but I received the premarked balls from you. Do you have a pattern I could use to cut material for each of the four sections? Thank you Terry

Leave a Reply Cancel Reply