Skip to content
An easy way to divide our Soft Foam Heart into 6 segments.
You will need...
- The easy-to-use Heart Marking Ruler Strip found below
- Paper scissors
- Pen/Pencil/Marker
- A couple of pins
- Flexible tape measure
Directions:
- Print out the template at 100% (do not re-size or use the 'Shrink to Fit' option on your printer).
- Cut out one of the templates.
- Pin to the mold line down one half of your Soft Foam Heart.
- Use the lines on the template to draw guidelines around the edge of your heart (see the video above for instructions).
Thank you for your promptness. Great